A CLAMBER Bike box bike comes fully equipped with chapels, cushions, three-point belts in all four locations, front and rear lamps, etc.
Rear Dapu 250W DC Brushless Motor
We have equipped the box cycle with a powerful electric motor, mounted in the rear hub, headwind nor heavy load becomes difficult - you choose how much help you need with a simple push of a button.
The gear of CLAMBER bike is Shimano 7 speeds.Also with the shifter lever & freewheel & derailleur etc.which can offer you a comfortable ride
Smart LCD display.
The LCD display shows speed, time, battery level and distance traveled. And it can show you how far will charged.
It is important that the brakes on a box cycle are efficient and pull evenly to avoid dangerous heights in traffic. Brakes with wire are often uneven over time so we have equipped CLAMBER Bike with powerful, disc brakes on at least front wheels. The brakes are lockable, which is handy when parking.
Safe and smooth.
For the safety of the children, the entrance steps and the chapel's opening are located on the pavement side and there are three-point belts in all four places. We have chosen large wheels with wide, cushioning tires and extra strong steering dampers, which makes the CLAMBER Bike very stable and easy to cycle. The bike is just a little over 80 cm wide and comes in at most places.
For four children - and more.
You can fit up to four children, but also the picnic basket, food boxes or sports equipment can be accommodated in the well-stocked box. One bench is a storage box and the other can be folded up. The box is made of lacquered waterproof plywood and the rugged, rugged box bottom makes sand and snow never a problem.
Easy storage and maintenance.
clamber Bike is almost completely maintenance-free but just like all things it sometimes needs a little care in terms of cleaning and overhaul. It can be stored standing on the nose and then pick up less than 1 sqm of surface. This is also practical when the cycle is to be cleaned and checked.
Hidden cords in the frame.
When we designed clamber Bike it was important for us not to have a lot of cords hanging. Therefore, we let all the cords and wires run inside the frame. It gets finer, easier to keep clean and they are not in the way of cycling.
Gears: Shimano 7 speeds
Drive Line: KMC
Brakes: Front TEKTRO disc brake and rear PROMAX V brake
Engine: Rear Dapu 250W DC Brushless hub
Battery: Lithium ion 10.5 LG Cell
Frame: Extra strong and stable frame in powder coated Hi-ten
Wheels: 24 ″ front and rear. 2 degree negative cam angle on the front wheels.
Tire type: Kenda with reflector line
Front tires: 24 × 1.95
Rear tires: 24 × 1.95